1"NH Twister Series Nozzle
The 1" (25mm) Twister is a selectable, dual gallonage, combination pattern nozzle, the 1"(25mm) threads are designed for simplicity and durability. The rubber bumper provides a positive grip and protects the front end. Twisting the shaper from the "off" position produces the following settings; low flow straight stream, low flow narrow fog, high flow straight stream, then high flow fog. The Twister, with its optional colored pistol grip and handle covers (NFPA 1901 A.16.9.1), is a rugged, economical nozzle that will accept the FJ-MX-D FoamJet multi-expansion foam aspirating attachment.
d | DS1024 | DS1040 |
Weight: | 1.8 lbs (0.82kg) | 3.1 lbs (1.4kg) |
Flow Control Method: | Selectable flow at a pressure (flow does changes with pattern) | Selectable flow at a pressure (flow does changes with pattern) |
Flow Rate: | 10 & 24 gpm (37 & 90 l/min) | 10 & 40 gpm (37 & 150 l/min) |
Coupling Size (Nozzles): | 1 inch (25mm) | 1 inch (25mm) |
Coupling Style (Nozzles): | Rocker | Rocker |
Coupling Swiveling/Rigid (Nozzles): | Swivel (non-full time, no swivel after tightening) | Swivel (non-full time, no swivel after tightening) |
Pressure: | 100 psi (7 bar) | 100 psi (7 bar) |
Nozzle Body Style: | Nozzle with shutoff | Nozzle with shutoff |
Valve Design: | Ball Valve (stainless) | Ball Valve (stainless) |
Valve Actuation Method: | Horseshoe (injection molded nylon with colored handle) | Horseshoe (injection molded nylon with colored handle) |
Fog Pattern Method: | No teeth | No teeth |
Nozzle Bumper Material: | Rubber - press fit | Rubber - press fit |