Details
Cleveland Style High Rise Pack Straps
This is a set of 3 straps to be used for a 100 ft. Cleveland hose lay. This is designed to be connected to and laid on top of a 100 ft length of pre-attached hose in your cross lay or hose bed. When making up the Cleveland lay for a cross lay or hose bed, it should be the length of your pre-connect.Pull the hose bundle out and put over your shoulder, as you walk you will pull the remainder of the 100 feet of hose from the hose bed until it is fully deployed. Drop the hose lay and grab 100’ hose pack and walk out additional 50’ in the hose bed. At the end of 50’, drop hose pack and disconnect the 3 straps. Find the middle of the pack and push it out into a circle. Grab the nozzle and signal the EO to charge the hose line to 120 psi. Once the line is charged, advance the line. Do not advance the line until it is fully charged to avoid extreme kinking.
The 3 straps are made with 2" Delrin side release buckles that are easily released with your glove on. There is a looped end for cinching up. This set allows one person to easily deploy up to 200 feet of hose.
- Each strap has an adjustable circumference range of 4"-27"
- Color: Royal Blue
- Wt. 16 oz.
- Compact. The load stays in place and does not cause a lot of ‘spaghetti’ in front of the house/structure.
- Use as much or as little hose as needed.
- It allows another firefighter to carry the bag with the other supplies for the apartment pack instead of one firefighter carrying everything
