Task Force Tips Legacy4-6" NH Threaded Male to 6" NH Swivel Female Jumbo Short Ball Intake Valve

Task Force Tips Legacy
Write a Review
MSRP: $3,255.00 - $3,719.00

$2,429.39 - $2,775.59

SKU:
W-TFT-AQ1S
Internal ID:
492365
bisibi_enabled:
F
stock_status:
Out of Stock
clearance:
false
SKU: W-TFT-AQ1S

Details

6" Swivel to 4-6" Rigid Male Threads Storz Jumbo Short Ball Intake Valve

AP series jumbo small intake valve has a huge 5¼ inch diameter waterway minimizing low friction loss and maximizing flow. Friction loss is 3psi at 2000gpm. Designed for use with 4, 5 or 6 inch (100, 125, 150mm) hose on a pressure or vacuum service pumper. Maximum operating pressure is 300psi (20bar) and meets the 900psi (62bar) hydrostatic strength test. Aluminum castings are hardcoat anodized with a powder coat finish inside and out for maximum corrosion protection. All components on the wet side of the valve are made of stainless steel for additional corrosion protection. The hand wheel needs 7½ turns to close, meeting NFPA slow close requirements. There is a unique position indicator that shows the operator if the valve is open, closed or somewhere in between. The standard gearbox handwheel is installed by the factory on the right side but can be switched to the left side if desired. Comes equipped with a rugged ¾ inch (19mm) drain valve to quickly drain water from the valve housing. A port for an optional air bleed valve is incorporated into the design for user friendly configuration. Hose coupling and truck connectors are attached to the valve using polymer bearing rings that provide electrical isolation to help prevent galvanic corrosion.
 
d AQ1SP-NX AQ1ST-NX AQ1SX-NX
Weight: 30 lbs (13.6kg) 30 lbs (13.6kg) 30 lbs (13.6kg)
Water Flow Style: Valve Valve Valve
Waterway Size: 5.25 inch (133.35mm) 5.25 inch (133.35mm) 5.25 inch (133.35mm)
Valve Actuation Method: Hand wheel (6 inch, injection molded nylon) Hand wheel (6 inch, injection molded nylon) Hand wheel (6 inch, injection molded nylon)
Valve Design: Ball valve (stainless) Ball valve (stainless) Ball valve (stainless)
Coupling Size Side A: 6 inch (150mm) 6 inch (150mm) 6 inch (150mm)
Coupling Style Side A: Handle Handle Handle
Coupling Swivel/Rigid Side A: Swivel (non full time, no swivel after tightening) Swivel (non full time, no swivel after tightening) Swivel (non full time, no swivel after tightening)
Coupling Size Side B: 4 inch (100mm) 5 inch (125mm) 6 inch (150mm)
Coupling Style Side B: Male threads Male threads Male threads
Coupling Swiveling/Rigid Side B: Rigid Rigid Rigid
Pressure Relief Valve: None None None
Finish: Powder coated Powder coated Powder coated
Gearbox Style: Shaft on side Shaft on side Shaft on side
Operation Energy Source: Manual Manual Manual