Task Force Tips Legacy Crossfire Top Deck Monitor

Task Force Tips Legacy
Write a Review

$1,904.99

You save: $647.01
MSRP: $2,552.00
SKU:
TFT-XFT-NJ
Internal ID:
603443
bisibi_enabled:
F
stock_status:
Ships from Manufacturer
clearance:
false
firearm:
false
exclude_free_shipping:
false
SKU: TFT-XFT-NJ

Details

CROSSFIRE MONITOR TOP 2.5"NH (65mm) OUTLET 

Crossfire Monitor Top can be connected to either a portable base or a truck with adapters or a TFT Extend-A-Gun. The connection is easy, positive, and visually verified. When in use, the release is "locked out" by water pressure. The waterway is a large 3.25" (83mm) which lets the CROSSFIRE deliver up to 1250 gpm (4500 l/min) with low friction loss. Horizontal rotation is securely locked with a simple lever, and position can be visually confirmed. Only seven (7) turns of the handwheel change the discharge elbow from vertical to the stop elevation. Includes highly visible pressure gauge and built-in automatic drain valve. Standard outlet thread is male 2.5" NH (65mm). 

Weight: 17.000 lbs (7.711 kg) 

Crossfire portable monitor with quick release swivel joint is designed for use on truck mounted risers and TFT Safe-Tak or Stow-A-Way 800 series portable bases. The monitor includes a locking button which locks the quick release lever when the monitor is pressurized, and a 1/4 turn rotational lever lock that secures the horizontal rotation and provides a visual indication that the monitor rotation is locked. For corrosion resistance the monitor is constructed from hardcoat anodized aluminum with a red powder coat interior and exterior finish.
 
The monitor has a 3-1/4" waterway for delivery of up to 1250 GPM with low friction loss. Vertical elevation is controlled through use of a handwheel controlled stainless steel worm gear which allows full travel to the safety stop point of 35 degrees above horizontal with seven rotations of the wheel. When positioned on a truck mounted riser the monitor is able to be used below the 35 degree stop point through release of the spring loaded safety pin.
 
An automatic drain to remove remaining water and avoid freezing is included. Integral stainless steel stream straightener and pressure gauge is also included. The monitor is configured with a Crossfire inlet and 2-1/2" male NH outlet. The unit is covered by a five-year warranty.
 
Monitor Configuration Portable
Flow Rate - Monitors  0-1250 gpm (0-4500 l/m)
Operational Energy Source Manual
Monitor Inlet Connect Female (XF)
Monitor Outlet 2.5” (65 mm)
Coupling Size Side A    2.5” (65 mm)
Coupling Style Side A Rocker
Horizontal Control  Lever Action Rotational Lock
Horizontal Movement  Continuous 360°
Vertical Control      Handwheel (6” injection molded nylon) 
Vertical Movement   90 below to 90 above horizontal
Safety Shutoff   No Safety Shutoff
Pressure Relief Valve             No PRV
Valve Design                                No Valve
Finish  Powder Coated Fire Engine Red
Certifications N/A