Details
Read More
Class I locations are made hazardous by the presence of flammable gases, liquids or vapors. Class II locations are hazardous because combustible dusts are present. Class III locations contain easily ignitable fibers or flyings. Division 2 locations are where ignitable concentrations are not likely to exist under normal operating conditions or where Class 3 materials are stored or handled.
Features:
Safety Rated Alkaline Battery-Powered Flashlight that provides a longer reaching, brighter beam that’s 10 times brighter than a high-intensity LED.
The 4AA ProPolymer® LUX is a high performance, 4 AA Alkaline powered, C4® LED flashlight. It features momentary or constant on operation. The body is constructed of an engineering polymer resin that is virtually indestructible, shock resistant, non-conductive and light weight. The case is O-ring sealed and water proof.Class I locations are made hazardous by the presence of flammable gases, liquids or vapors. Class II locations are hazardous because combustible dusts are present. Class III locations contain easily ignitable fibers or flyings. Division 2 locations are where ignitable concentrations are not likely to exist under normal operating conditions or where Class 3 materials are stored or handled.
Features:
- C4® LED technology, with a 50,000 hour lifetime
- Unbreakable polycarbonate lens with scratch-resistant coating
- 100 lumens typical; up to 4,200 candela peak beam intensity
- Deep parabolic beam generator produces long range brilliance and smooth uniform pattern
- Four "AA" size alkaline batteries
- Ergonomically shaped for maximum hand comfort
- Rubber-booted, tail end, push-button tail switch for one handed operation
- Solid state power regulation provides maximum light output throughout battery life
- 6 hour run time; 4 hrs. of regulated run time with 2 hrs. of declining usable light
- IP67 Ingress Protection
- Shock resistant (drop test verified).
- Waterproof
- Non-conductive; corrosion proof
- Wrist lanyard connector
- Assembled in USA
| Case Material: |
|---|
| Impact resistant engineering polymer resin. The lens cover is made from the same impact resistant polymer as the body |
| Dimensions: |
| Length: 7 in. (17.78) Body thickness: 0.97 in (2.46cm) Width: 1.35 in. (3.43cm) Facecap diameter: 1.69 in. (4.29cm) Body diameter: 1.48 in. (3.76cm) |
| Weight: |
| 4.2 ounces (120 grams) ; 7.6 ounces (216 grams) with battery included in purchase |
| Lens: |
| Unbreakable polycarbonate lens with scratch resistant coating |
| Light Source: |
| One (1) Watt super high flux LED, 10,000 hour LED life |
| Output: |
| 100 lumens |
| Run Time: |
| 4 hours continuous at full intensity. 2 additional hours of declining useable output |
| ON/OFF: |
| Rubber booted, tail-end, push button switch for one handed operation |
| Batteries: |
| Four (4) "AA" size alkaline batteries |
| Approvals: |
| Meets applicable European Community Directives Division 2: UL Listed Class I, Division 2, Groups A, B, C & D; Class II, Division 2, Groups F & G; Class III; Temperature Code T3C ATEX Zone 1: II 2GD EEx ib IIB T4 IP65 (T67C) - SNCH 04 ATEX 3639 |
| Warranty: |
| Streamlight warrants this product to be free of defects for a lifetime of use except for batteries and bulbs, abuse and normal wear. We will repair, replace or refund the purchase price of this product should we determine it to be defective. This limited lifetime warranty also excludes rechargeable batteries, chargers, switches and electronics which have a 2 year warranty with proof of purchase. THIS IS THE ONLY WARRANTY,EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARE EXPRESSLY DISCLAIMED EXCEPT WHERE SUCH LIMITATION IS PROHIBITED BY LAW. You may have other specific legal rights which vary by jurisdiction. |
